+91 9810259839 / +91 9946819724

info@qsmetrology.com

Product Details

Metallurgical Image Analysis System

Categories: Imaging Solutions

QS Metrology offers Metallurgical Image Analysis System (MIAS®), which is an advanced system for Metallographic study of metals. This system is based on the technology transfer from BARC (Bhabha Atomic Research Centre), and conforms to ASTM Standards. MIAS is our registered trademark.

Modules
  • Grain Analysis
  • Phase Analysis
  • Inclusion Analysis
  • Nodule Analysis
  • Flake Analysis
  • Dendritic Arm Spacing
  • Porosity Analysis
  • Coating Thickness measurement
  • Decarburization
  • Basic 2D measurements
The system consists of
  • Trinocular Metallurgical microscope
  • MP CMOS USB Camera
  • MIAS® Software
  • Image functions Image rotation
    Gray scale
    Image flipping (horizontal or vertical)
    Histograms
    Invert
    Brightness correction
  • Filters Image Analysis filters like:
    Laplacian
    Sobel
    Blur
    Noise reduction
    Edge detection and enhancement filters
    Substraction
    Morphology filters
    Thresholding
  • Images Image database
    Image database filtering by date and type (grains, phases, nodularity, inclusion etc)
    Image view or Live view
    Switch between image view and live view
    Supports multiple image formats like JPEG, BMP, PNG etcb
  • Grain size analysis User defined configurations with filter conditions
    User defined image enhancement & grain detection functions
    User can save program as configuration for future use
    Automatically creates Grain Boundary structure
    Planimetric method
    Hayn Linear Intercept method
    Hillard/Abrams Circle Intercept method
    Manual grain analysis
    Custom grain analysis functions
    Supports grain editing/correction
    ALA grain size (ASTM E930) analysis
    Supports multiple samples
  • Particle size analysis User defined configurations with filter conditions
    Image enhancement functions for particle detection
    Analyze and detects particles based on defined configuration/filter
    Analyze particles for length, area, circularity/elongation/roundness, Ferret length/major axis, minor axis
    Can detect area, length, width, circularity/roundness/shape factor, ferret length, perimeter of various particles of different shapes like fibre, impurities on filter etc
    Can group particles identified into different buckets (user defined) by length, area, roundness, width, circularity etc
    Supports multiple samples
  • Coating thickness measurement User defined configurations with filter conditions
    Image enhancement functions
    Automatically identifies coating boundary
    Gives MIN/ MAX/ AVG/ STD DEV of results
    Can measure thickness at user selected points, all points or at user selected intervals
    Supports multiple samples
  • Porosity analysis User defined image enhancement and filter functions
    User can save program as configuration
    User can switch to LIVE video to further analyze a feature through focus adjustment
    User can group selected features into different buckets based on size and shape
    Supports multiple samples
  • Nodularity User defined configurations with filter conditions
    Nodularity by count, Nodularity by area and Nodule density
    Group results by Nodule size 1 to 8
    Can export results for Phase analysis
    Automatically detects Nodules based on set filter conditions
    Supports multiple samples
  • Inclusion User defined configurations with filter conditions
    Detects Inclusions and group by type (A, B, C, D) and further by THIN/THICK
    Detection of Oversized Inclusions
    Supports multiple samples
  • Phase analysis User defined configurations with filter conditions
    Can import results from Nodule/Flake analysis for Graphite/Phase report
    Can detect and isolate Nodules in the image automatically or manually
    Supports Phase splitting
    Supports Manual point count method
    User can save configurations for future use
    Supports multiple samples
  • Flake analysis User defined configurations with filter conditions
    Detects and group Flakes by type A, B, C, D and E
    Detects and group Flakes by size (1 to 8)
    User can manually set Flake types/correction
    Can export results for Phase analysis
    Supports multiple samples
  • Dendrite Arm Spacing (for Al) User defined configurations with filter conditions
    Image enhancement functions
    For analysis on Aluminum
    Supports multiple samples
  • Decarburization analysis User defined configurations with filter conditions
    Image enhancement functions
    Decarburization on Steel
    Decarburization on Steel
    Supports multiple samples
  • 2D measurements Supports all 2D measurements like length, width, distance between points, angle, area, perimeter
    Supports tools for boundary detection like Line, Circle, Arc, Angle, Curve, Closed curve
  • Reports Reports in PDF and Excel format

Our Principals